Self-repairing high-speed rolling door - AR 600

High-speed door designed for work environments with very intense workflow with self-repairing function. 

AR 600 is a high-speed door designed to meet the needs of industrial sectors with high-performance requirements, a particularly heavy use of the passage and operating safety in all conditions are required. This model has a high opening speed reaching 1.5 m/s and, if bumped, can immediately resume operation thanks to the special rearming system of the curtain (it returns inside the guides automatically). Standard self-repairing and "soft start & stop" function.


Minimum dimensions:  W 2000 x H 2000 mm 

Maximum dimensions:  W 6000 x H 5000 mm  


Application:  internal/external

Opening speed:  1,5 m/sec

Standard metal structure: 
top cross member in die-bent sheet metal made of galvanized steel -prepainted white RAL 9002, thickness 1.5 mm. Galvanized steel lateral jambs, suitably profiled to facilitate installation without the use of external plates, equipped with slots for adjustment.

Curtain or cover:  Tear-resistant PVC, 900 g/m². At eye level, one row of transparent heat-sealed inspection windows.   

It is possible to create entire transparent sectors with variable dimensions depending on the width of the opening (see image).


  • 4/5 mm thick fireproof Class 2 insulated fabric made of PVC. Weight 1400 g/m²
  • double weft PVC fabric, weight 580g /m², self-extinguishing Class 1

Side slides:  profiled in high molecular density polyzene housed inside the jambs. The polyzene is self-lubricating for perfect sliding of the curtain and designed with a special cut letting the curtain slip back in place in case of breakage (self-repairing system). They are also equipped with an exclusive lateral adjustment system with springs, for optimal tensioning of the curtain.

Resistance to bending:  100.000 bends without tearing

Tear resistance:  500 N

Tensile strength:  4000 N

Wind resistance: certified Class 2 - (45 Kg/m²) with door closed

Thermal resistance:  – 30 °C to + 70 °C  

Roller shaft:  diameter 90/120 mm supported by ball bearings

Drive unit:  three-phase motor 230 V-50 Hz with electric brake suitable for intensive use. Digital limit switches with encoder incorporated into the gear unit, easy to inspect and adjustable. Thermal circuit breaker for protection against voltage surges.

Gear reducer:  with long-life lubrication and maintenance-free. Fitted directly on the roller shaft or driven by a transmission chain. 

Emergency procedure:   release rod for manual opening of the curtain in case of power failure. When the rod is engaged, a safety micro-switch automatically cuts off power to the motor.

Please note: for high-speed doors over 20 m², we recommend the use of a backup battery.

CE UNI EN 13241-1 marking data: 
-    Operating speed - up to 1.5 ÷ 2 m/sec
-    Operating temperature -20°C, + 50°C
-    Wind load resistance with door closed - Class 2

Control panel:  with external display equipped with inverter with acceleration and deceleration ramps, 230V power supply and 24 V auxiliaries. IP 55 protection rating. It is equipped with easy-to-remove motherboard and separate inverter. 

Push-button panel:   membrane push-button panel with “Opening — Closing — Pedestrian” button (partial opening) and EMERGENCY stop mushroom-shaped push-button. Pre-wired electrical system: 230/24 V separate voltage lines (as required by regulatory standards); photocells/safety light curtains, flashing light, electric brake, encoder and motor are already connected to the junction box fitted with cables prepared for connection to the control panel

High-speed door control KIT ››


Colours available:  

Colori porta rapida AR600 IMVA

The curtain may slightly differ from the corresponding RAL paint 

Want to know more?

Tel.: +39 059 908313



This is IMVA world, our activities, the trade missions that took us on the international stage...  »

Focus on

Industrial doors: information and technical news


Here you can download IMVA product catalogues.